Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TD200C with cpu226

Created by: Roby at: 7/29/2006 9:32 AM (1 Replies)

Rating (1)

Thanks 0

2 Entries

7/29/2006 9:32 AM	Rate (0)
Roby Silver Member Joined: 4/10/2006 Last visit: 11/11/2024 Posts: 942 Rating: (2)	Hi! I have a problem to identify the bits associate to TD200C keys... after configuration (using TD assist in step7 microwin 4.0), i have a parameters block with Vx memory... When turn on-off a key on the TD200 panel, how can i to see the bit assigned in Vx.x memory? And for recall one allarm? I don't understand... Please help me Thank Roby
	Setting of my PG M6 Siemens OS: Windows 10 Enterprise 22H2; Intel(R) Core(TM) i7-8850H CPU @ 2.60GHz 2.59 GHz - 32G of RAM TIA15.1 Update 8; TIA17 Update 7; TIA18 Update 4 (i use normally)
Suggestion To thank Quote Answer

7/31/2006 9:11 AM	Rate (1)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 11/13/2024 Posts: 8768 Rating: (1171)	Hi Roby, Have you seen the following link: http://support.automation.siemens.com/WW/view/en/21334782 Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on