Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

compile and errors

Created by: GKATSA at: 2/19/2006 12:41 PM (3 Replies)

Rating (1)

Thanks 0

4 Entries

2/19/2006 12:41 PM	Rate (0)
GKATSA Posts: 2 Rating: (0)	EVERY TIME YOY MAKE A COMPILE PROCEDURE THE COMPILER OUTPUTS THE RESULTS AT THE OUTPUT WINDOW.IN CASE THERE IS AN ERROR IN MY PROGRAM HOW CAN I FIND THE ERRORS EXACT POSITION THROUGH THE PROGRAM? THE OUTPUT WINDOW DISPLAYS ONLY THE TOTAL NUMPER OF ERRORS
GKATSA Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

2/20/2006 4:57 PM	Rate (0)
Denilson Pegaia Platinum Member Joined: 9/23/2005 Last visit: 11/13/2024 Posts: 4352 Rating: (1452)	Hi, whitch software you use?
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

2/20/2006 5:26 PM	Rate (0)
GKATSA Posts: 2 Rating: (0)	Hi I use mirowin v4.0 plus service pack3 thank you in advance for any help
GKATSA Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

2/22/2006 12:35 PM	Rate (1)
Denilson Pegaia Platinum Member Joined: 9/23/2005 Last visit: 11/13/2024 Posts: 4352 Rating: (1452)	Hi, scrow up the window, the cause must be there. TIP: if you double click the error line, the sofware jump to the fault network.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on