Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Error Codes from RF180C in TIA Portal

Created by: Eduardo_2020 at: 2/11/2022 5:31 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/11/2022 5:31 PM	Rate (0)
Eduardo_2020 Member Joined: 9/1/2020 Last visit: 3/24/2024 Posts: 12 Rating: (0)	Good morning, i have a RFID 180C and error code DF80_C200, how does I interpret this error code? i cant find the appropiate manual Best regards, Eduardo Pizana Attachment Capture.PNG (1231 Downloads)

Suggestion To thank Quote Answer

2/14/2022 11:40 AM	Rate (0)
Owei Gold Expert Joined: 10/1/2013 Last visit: 5/8/2024 Posts: 605 Rating: (71)	Hi Eduardo, I assume you use the ident blocks. Here's where you can find the error codes: https://support.industry.siemens.com/cs/ww/en/view/109793329 Errors starting with "DF..." point to the S7 backplane bus ("WRREC" / "RDREC"). Check out the TIA help (F1) for those function blocks and further information about those error codes.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on