Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Connect CJ1H with RF185

Created by: jmb26 at: 1/4/2024 1:56 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/4/2024 1:56 PM	Rate (0)
jmb26 Member Joined: 1/16/2021 Last visit: 10/16/2024 Posts: 2 Rating: (0)	Good afternoon, Is it possible to connect an Omron CJ1H PLC (with ETN21) with an RF185, do you know any examples?
	Last edited by: jmb26 at: 01/04/2024 13:56:45 Last edited by: The Helping Hand at: 01/04/2024 14:47:59 Text formatting optimized
Suggestion To thank Quote Answer

1/4/2024 2:21 PM	Rate (0)
AutoGen_603526 Member Joined: 2/10/2015 Last visit: 10/22/2024 Posts: 12 Rating: (0)	Hi,we have an example for using RF18xC with Omron controller. Please see the following link: https://support.industry.siemens.com/cs/ww/en/view/109757881
	Last edited by: The Helping Hand at: 01/04/2024 14:49:20 Link optimized
Suggestion To thank Quote Answer

1/4/2024 2:37 PM	Rate (0)
jmb26 Member Joined: 1/16/2021 Last visit: 10/16/2024 Posts: 2 Rating: (0)	Hi, thanks for your response. However, the example uses sysmac studio (I use cx-programmer) and I also don't know where to get the library mentioned in the article.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on