Navigation

Output r2521 to TB30 analog output.

Created by: Papa123 at: 4/17/2024 2:57 PM (1 Replies)

4/17/2024 2:57 PM	Rate (0)
Papa123 Member Joined: 6/29/2018 Last visit: 10/14/2024 Posts: 18 Rating: (0)	with STARTER: I would like to output the actual position r2521[0] CO: "LR position actual". However, this signal is not offered in the list of "further interconnections" for p4071[0] CI: "TB30 AO 0 analog output signal source". I could interconnect to some variables of my SERVO, e.g. r63: CO: Actual speed smoothed. How do I make SERVO's r2521[0] available as TB30 A0 0 input? If the AO0 accepts only 16bit values, I would be happy with the low word of (32bit long) r2521[0], as I have a modulo axis with 2^16. ------------------------------------------------------------------------------------------ Split from Global Variable to TB30 Analog Output ?.
	Last edited by: Jen_Moderator at: 04/18/2024 05:53:54 New subject after splitting
Suggestion To thank Quote Answer

4/18/2024 6:49 AM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 10/30/2024 Posts: 5933 Rating: (815)	Hello, that's not a 32 Bit to 16 Bit conversion topic, but a topic of different data types. You cannot interconnect the 32 Bit Integer value of r2521 to the analogue output, which expects a floating point variable. You would need to convert the value with as self selected normalization, but this could only be done in DCC with 1 ms as fastest sampling time. Attachment data type r2521.png (200 Downloads)
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer