Default Header
(header konnte nicht geladen werden)
sinumerik 810D fault 1-0-9 LED flashing
Created by: AutoGen_9021420 at: 4/4/2025 3:29 PM (3 Replies)
Rating 
Thanks 0
4 Entries
| 4/4/2025 3:29 PM | |
Joined: 7/20/2023 Last visit: 4/8/2025 Posts: 25 Rating:
|
Hello I have the same problem. I got a battery error, I lost parameters only in the spindle. So I tried to put the arc files back in without success. The NCU won't let me reset the NC and PLC. It always flashes 1-0-9. Or if I turn the machine back on, all the LEDs are on and only one dot appears on the display. If I disconnect the memory card, 0-6 appears. Could it be that the card lost the software? Thanks ------------------------------------------------------------------------------------------ |
Last edited by: Moderator_Lan at: 04/07/2025 07:00:01New subject after splitting |
|
| 4/4/2025 3:41 PM | |
|
Joined: 7/20/2023 Last visit: 4/8/2025 Posts: 25 Rating:
|
|
| 4/4/2025 3:43 PM | |
|
Joined: 7/20/2023 Last visit: 4/8/2025 Posts: 25 Rating:
|
|
| 4/6/2025 1:48 AM | |
Joined: 10/17/2007 Last visit: 4/9/2025 Posts: 4275 Rating:
|
what is you CNC system--810D or 840D it is very important please post picture from front of CCU or NCU
|
|
If you like my comments please |
|
Technical Forum - SiePortal Community
We are working on a new user interface with better overview and more relevance.
Follow us on