Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Alarm Handling

Created by: Richard Jupp at: 7/25/2006 12:08 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/25/2006 12:08 PM	Rate (0)
Richard Jupp Posts: 47 Rating: (0)	Using a TP270 and archiving alarms for historic purposes when the alarm display is opened a message is displayed "SCRIPT FULL" can you advise on this please as i cannot find any reference to this. Are the archive files full?
Richard Jupp Posts: 47 Rating: (0)
Suggestion To thank Quote Answer

7/26/2006 1:21 PM	Rate (0)
Nemo Posts: 3149 Rating: (172)	Hi unfortunately I´ve never heard of the message, but you should check anyway the scripts in your picture. Do access/write values in a file on your memory card? Is this card already full? nemo
Nemo Posts: 3149 Rating: (172)
Suggestion To thank Quote Answer

7/26/2006 1:46 PM	Rate (0)
Richard Jupp Posts: 47 Rating: (0)	Thanks for your response, The alarm archive is held on the flash card but the machine is in the USA so I don't know if the card is full. Regards Richard
Richard Jupp Posts: 47 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on