Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Fonts size and new installation of ProTool

Created by: HSB at: 4/25/2006 9:35 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

4/25/2006 9:35 AM	Rate (0)
HSB Posts: 2 Rating: (0)	When I installed ProTool V6.0 SP2 on a new notebook and edit an older programm, 1 year, most of the fonts are bigger. Also the input fields are to big. Three MP370 in combination with S7-315 2DP. Is this a wrong default setting or something with a language setting? Step 7 V5.3 + HF1, older software worked on V5.2 + SP Thanks
HSB Posts: 2 Rating: (0)	Last edited by: HSB at: 4/25/2006 1:21 PM
Suggestion To thank Quote Answer

4/25/2006 4:56 PM	Rate (0)
Nemo Posts: 3149 Rating: (172)	Hi HSB, please check the display-settings in your Windows installation, I guess there is your problem... nemo.
Nemo Posts: 3149 Rating: (172)
Suggestion To thank Quote Answer

4/27/2006 3:08 PM	Rate (0)
HSB Posts: 2 Rating: (0)	Hi Nemo, That's the problem, it 's solved. An other question: In a script i want to copy a file, the function f.FileCopy filename1, filename2 isn't accepted by the MP370. The compiler don't give any problems but the MP370 doesn't know the instruction. At this moment we are reading a file in an array and write the array to an other file. Spending a lot of time on the network. Thanks, Andy
HSB Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

4/28/2006 11:36 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 12/19/2025 Posts: 9085 Rating: (1202)	Hi, Perhaps you find som information in following Faq: http://support.automation.siemens.com/WW/view/en/13408815 visual basic on WinCE. Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on