Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Connect sensor to LOGO

Created by: @AutoGen_1070675 at: 11/20/2023 9:23 AM (18 Replies)

Rating (0)

Thanks 0

19 Entries

Entries per page: 10 | all

11/20/2023 9:23 AM	Rate (0)
@AutoGen_1070675 Posts: 54 Rating: (0)	sorry to disturb you but how to represent a sensor on this software to connect ------------------------------------------------------------------------------------------ Split from change value of sensor.
@AutoGen_1070675 Posts: 54 Rating: (0)	Last edited by: @AutoGen_1070675 at: 11/20/2023 09:33:17 Last edited by: Jen_Moderator at: 11/20/2023 13:30:06 New subject after splitting
Suggestion To thank Quote Answer

11/20/2023 9:38 AM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/15/2025 Posts: 35961 Rating: (4502)	Then you have to describe in a more understandable way what exactly you want to do. I've already written to you that the way you ask questions is very confusing. And note: The LOGO! has no "PLC buttons" but cursor keys.

Suggestion To thank Quote Answer

11/20/2023 9:47 AM	Rate (0)
@AutoGen_1070675 Posts: 54 Rating: (0)	sorry i just search if you can simulate a sensor on the industrial programmable controller
@AutoGen_1070675 Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

11/20/2023 9:55 AM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/15/2025 Posts: 35961 Rating: (4502)	Take a look at the attached video. Attachment AI_value_changing_in_simulation.zip (510 Downloads)

Suggestion To thank Quote Answer

11/20/2023 12:10 PM	Rate (0)
@AutoGen_1070675 Posts: 54 Rating: (0)	oh it s the simulate of a sensor thank you but you cant link analogue and binary cable and this an analogue cable any solution for this?
@AutoGen_1070675 Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

11/20/2023 1:03 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/15/2025 Posts: 35961 Rating: (4502)	Analog connections = thick line in the diagram. Digital connection = thin line in the diagram. Thick lines and thin lines cannot be connected to each other. Why should be clear, right? I can't tell you what you want to know now, because once again you don't describe specifically what you want to do.

Suggestion To thank Quote Answer

11/20/2023 1:23 PM	Rate (0)
@AutoGen_1070675 Posts: 54 Rating: (0)	hello I fully understand the difference between the analog and digital connections but it is impossible to link them together? in any way because in the way my program works I can't see how to transform an analog value, sensor into a digital value program of choice thanks you
@AutoGen_1070675 Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

11/20/2023 1:35 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/15/2025 Posts: 35961 Rating: (4502)	My God, give me a concrete example of what you want to do. I'm not Jesus, I can't walk on water, I don't have holes in my hands and my crystal ball is currently being repaired.

Suggestion To thank Quote Answer

11/20/2023 1:52 PM	Rate (0)
@AutoGen_1070675 Posts: 54 Rating: (0)	i dont have any concratical example because i just have the logo soft comfort V8.3
@AutoGen_1070675 Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

11/20/2023 3:12 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/15/2025 Posts: 35961 Rating: (4502)	Maybe this link help you ... How can you configure references between blocks in LOGO! 8?

Suggestion To thank Quote Answer

11/20/2023 4:56 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/15/2025 Posts: 35961 Rating: (4502)	And here another link: LOGO!-Library – Functions for analog value processing and communication

Suggestion To thank Quote Answer

11/21/2023 7:55 AM	Rate (0)
@AutoGen_1070675 Posts: 54 Rating: (0)	thank you but it dasnt help me i try to rexplain with all information: -The dyno must have 2 sensors, 1 for temperature and 1 for speed. -I must be able to indicate a desired temperature, at a given speed and that once this temperature is reached it rises automatically to a number of rpm that I indicate (this is my main problem). -I need to be able to do this manually too (no problem at this level as you have already helped me a lot with this). -I need to be able to raise a resistor for the temperature sensor to a given temperature for the temperature sensor , (but this is not normally complicated) thank you and still sorry
@AutoGen_1070675 Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

11/21/2023 8:15 AM	Rate (0)
@AutoGen_1070675 Posts: 54 Rating: (0)	I may have found it. I'll get back to you if I have.
@AutoGen_1070675 Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

11/21/2023 8:25 AM	Rate (0)
@AutoGen_1070675 Posts: 54 Rating: (0)	i suceed i just coccect the cnt a great thank you at you Attachment image_2023-11-21_092513129.png (553 Downloads)
@AutoGen_1070675 Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

11/21/2023 9:02 AM	Rate (0)
@AutoGen_1070675 Posts: 54 Rating: (0)	hello again, do you know why on the adjustment panel what I want to do works but on the theoretical panel it displays B27? when all I have done is remove a cable and put it back in the same place.* thank you Attachment image_2023-11-21_100225252.png (514 Downloads)
@AutoGen_1070675 Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

11/21/2023 9:03 AM	Rate (0)
@AutoGen_1070675 Posts: 54 Rating: (0)	Attachment image_2023-11-21_100326693.png (415 Downloads)
@AutoGen_1070675 Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

11/21/2023 10:03 AM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/15/2025 Posts: 35961 Rating: (4502)	The 0N parameter of B003 is a referenced value from B027. Is a parameter only a referenced value, then shows the display the source of the reference, in your case B027. And you mean my links aren't helpfil?

Suggestion To thank Quote Answer

11/21/2023 12:02 PM	Rate (0)
@AutoGen_1070675 Posts: 54 Rating: (0)	for the link at the beginning, yes, but i read it again and it was helpfull and for it to display the data and not the source of the reference I can't find it thank you
@AutoGen_1070675 Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

11/21/2023 12:32 PM	Rate (0)
@AutoGen_1070675 Posts: 54 Rating: (0)	this is good thank you
@AutoGen_1070675 Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on