Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Q 100.0 ???

Created by: bzykus at: 2/22/2006 4:49 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/22/2006 4:49 PM	Rate (0)
bzykus Posts: 9 Rating: (0)	Hi! I have program to modifity. Someone used FB250 (scaling analog input). There is argument in this function called "EINZ" (single scan). To this argument has been assigned Q 100.0. What does it mean??? What is Q 100.0??? Please help.
bzykus Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

2/23/2006 12:50 PM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hi, Q 100.0 means Output Bit 100.0. [;)] Regarding the FB 250 I would recommend to read the following page and it’s Links: http://support.automation.siemens.com/WW/view/en/1085937 There in Chapter 10 of this manual. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)	Last edited by: J_Bell at: 2/23/2006 1:01 PM
Suggestion To thank Quote Answer

2/28/2006 9:14 PM	Rate (0)
Late Platinum Expert Joined: 1/7/2006 Last visit: 11/17/2023 Posts: 2705 Rating: (318)	Hi, Single Scan is used when the Analog Card only have to read on command the Analog Value. This may save time, but is not used frequently. Best regards, Late
	I hope that the answer will help, if you have still questions, don't hesitate to ask me. All the best, Late Never say never, think in solutions, not in trouble......
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on