Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Connect sensor to LOGO

Created by: @AutoGen_1070675 at: 11/20/2023 9:23 AM (18 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

19 Entries

Entries per page: 10 | all

11/20/2023 4:56 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/6/2025 Posts: 35928 Rating: (4497)	And here another link: LOGO!-Library – Functions for analog value processing and communication

Suggestion To thank Quote Answer

11/21/2023 7:55 AM	Rate (0)
@AutoGen_1070675 Posts: 54 Rating: (0)	thank you but it dasnt help me i try to rexplain with all information: -The dyno must have 2 sensors, 1 for temperature and 1 for speed. -I must be able to indicate a desired temperature, at a given speed and that once this temperature is reached it rises automatically to a number of rpm that I indicate (this is my main problem). -I need to be able to do this manually too (no problem at this level as you have already helped me a lot with this). -I need to be able to raise a resistor for the temperature sensor to a given temperature for the temperature sensor , (but this is not normally complicated) thank you and still sorry
@AutoGen_1070675 Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

11/21/2023 8:15 AM	Rate (0)
@AutoGen_1070675 Posts: 54 Rating: (0)	I may have found it. I'll get back to you if I have.
@AutoGen_1070675 Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

11/21/2023 8:25 AM	Rate (0)
@AutoGen_1070675 Posts: 54 Rating: (0)	i suceed i just coccect the cnt a great thank you at you Attachment image_2023-11-21_092513129.png (551 Downloads)
@AutoGen_1070675 Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

11/21/2023 9:02 AM	Rate (0)
@AutoGen_1070675 Posts: 54 Rating: (0)	hello again, do you know why on the adjustment panel what I want to do works but on the theoretical panel it displays B27? when all I have done is remove a cable and put it back in the same place.* thank you Attachment image_2023-11-21_100225252.png (512 Downloads)
@AutoGen_1070675 Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

11/21/2023 9:03 AM	Rate (0)
@AutoGen_1070675 Posts: 54 Rating: (0)	Attachment image_2023-11-21_100326693.png (412 Downloads)
@AutoGen_1070675 Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

11/21/2023 10:03 AM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/6/2025 Posts: 35928 Rating: (4497)	The 0N parameter of B003 is a referenced value from B027. Is a parameter only a referenced value, then shows the display the source of the reference, in your case B027. And you mean my links aren't helpfil?

Suggestion To thank Quote Answer

11/21/2023 12:02 PM	Rate (0)
@AutoGen_1070675 Posts: 54 Rating: (0)	for the link at the beginning, yes, but i read it again and it was helpfull and for it to display the data and not the source of the reference I can't find it thank you
@AutoGen_1070675 Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

11/21/2023 12:32 PM	Rate (0)
@AutoGen_1070675 Posts: 54 Rating: (0)	this is good thank you
@AutoGen_1070675 Posts: 54 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on