Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

LOGO TD - how to disable screen changing

Created by: dzwilu at: 6/17/2009 3:23 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

6/17/2009 3:23 PM	Rate (0)
dzwilu Bronze Member Joined: 12/3/2008 Last visit: 3/22/2022 Posts: 146 Rating: (4)	The problem is I'd like to make it impossible for the operator, to change the TD Display screens. What i mean is, if he presses any arrow-key, nothing should happen (The screen switches to clock, or some i/o monitoring). I cant find any option how to solve it Best regards dzwilu

Suggestion To thank Quote Answer

6/17/2009 4:09 PM	Rate (0)
LOGO!Barbarian Posts: 173 Rating: (95)	Hi dzwilu This seems to be the same sort of query that someone had on 27.05.2009 - check the threads below about disabling the buttons. There was a 'creative' if not destructive idea that this guy had - maybe you can use that too! There is no way in the programming to prevent the change of the screen when the cursor or ESC or OK buttons are pressed. Even if you use a LOGO! Pure with the new Text Display, the buttons on that will also cause other menu/navigation/status/clock screens to be shown. If you disable the buttons like the other guy said, then you could make a message that is always displayed by using a Message Text with either a 'hi' on the En input or double click the En input to invert it. Don't generate any other message texts that will show. Also set the priority of the message that you always want to show to the HIGHEST number (0 is the lowest priority and other messages will always take priority over it) Sorry for no other solution!
LOGO!Barbarian Posts: 173 Rating: (95)
Suggestion To thank Quote Answer

6/17/2009 4:42 PM	Rate (0)
dzwilu Bronze Member Joined: 12/3/2008 Last visit: 3/22/2022 Posts: 146 Rating: (4)	Thats not the best idea :/ Using the navigation buttons it is easy to stop the program... And that should be impossible.... Any other ideas? Best regards dzwilu

Suggestion To thank Quote Answer

6/17/2009 5:57 PM	Rate (0)
turbojenks Posts: 10 Rating: (2)	I agree, when a logo is used as a HMI it is succeptible to 'fiddlers' who like to explore where button pushing can take them!!. It would be nice to see Siemens offer more security when using it as HMI especially with the TD! which carries all the same functionality of 'cursor', 'esc' and 'ok'. Although I regard Logo as one of the top products on the market versus cost, it can still be improved with just a firmware/software modification. I look forward to the 0BA7, as the 6 and 5 releases were very impressive at the time and hopefully Seimens will continue to take customer feedback as they have with previous editions.
turbojenks Posts: 10 Rating: (2)
Suggestion To thank Quote Answer

6/18/2009 11:58 AM	Rate (0)
LOGO!Barbarian Posts: 173 Rating: (95)	Hi all 'fiddlers' of buttons! Please see my post under the topic 'How to disable the buttons' /tf/WW/en/Posts/30453#top Cheers
LOGO!Barbarian Posts: 173 Rating: (95)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on