Navigation

Logo module choosing doubt

Created by: AutoGen_2728240 at: 4/8/2024 12:50 PM (1 Replies)

4/8/2024 12:50 PM	Rate (0)
AutoGen_2728240 Posts: 1 Rating: (0)	Hi, i´m trying to use LOGO! 8.3 to run two 24 volt DC motors, which module do you recommend me to add? I have seen the 6EP3332-6SB00-0AY0 but I don´t know if it is the best option and if it could handle both motors at the same time. Thank you for your time.
AutoGen_2728240 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

4/8/2024 1:41 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 9/3/2025 Posts: 35914 Rating: (4496)	Without any data from the DC motors, who is going to give you information?

Suggestion To thank Quote Answer