Changing Display Language

Your LOGO! has a display. You can use the display to change the menu language to English.
As the menu language is set to Chinese according to your specification, however, it will be a "blind flight".
Press the Down cursor key repeatedly until the start-up screen is displayed. This is usually the screen with the date and time.
Then press the ESC key. You are now in the menu. The further procedure depends on whether the LOGO! is in RUN or STOP mode.

If the LOGO! is in RUN:
Select the third menu item and press the OK key. Then select the fifth menu item (this is the menu item under LCD) and press the OK key. Then select the second menu item "English" and press the OK key. The menu language should now be set to English.

If the LOGO! is in STOP:
Select the third menu item and press the OK key. Then select the eighth menu item (this is the menu item under LCD) and press the OK key. Then select the second menu item "English" and press the OK button.
The menu language should now be set to English.