Navigation

Sinumerik 808D M code problem - Code not executed

Created by: raj kumar_sharma2208 at: 12/3/2024 3:38 AM (1 Replies)

12/3/2024 3:38 AM	Rate (0)
raj kumar_sharma2208 Joined: 9/30/2023 Last visit: 2/27/2025 Posts: 3 Rating: (0)	Hi, I hav 808d controller and I want to set a bit by using a m code. I writed plc program for example m11 is my code but when I calll m11 in mdi mode nothing happens on my plc program ------------------------------------------------------------------------------------------ Split from Sinumerik 808D M code problem.
	Last edited by: Moderator_Lan at: 12/03/2024 07:43:57 New subject after splitting
Suggestion To thank Quote Answer

12/3/2024 8:54 AM	Rate (0)
Riddersholm Bronze-Expert Joined: 5/24/2016 Last visit: 8/31/2025 Posts: 408 Rating: (61)	Hello. Could you please share the PLC project then we can have a look? Best Regards Riddersholm
	Last edited by: Riddersholm at: 12/03/2024 08:54:57
Suggestion To thank Quote Answer