Sinumeric axis error 300500

 I  see your A axis has 300500 alarm, you can try to order same drive box such as 2x15A,

replaced the old one 

tkaczu277

Hi I have problem with my stone cutting machine. Speedycut from Brenton.

It runs on Sinumeric 810d. And has 3 basic axis (x,y,z) and two additional axis a - Wich is an angle of cutting disk and w - rotating table.

Now I have errors saying something is wrong with a axis.

This axis is connected to this board https://www.ebay.com/itm/226047534881?_skw=6sn1118-0DM33-0AA1&epid=13012038502&itmmeta=01JGBJ542X9N0MRMT82HV5SXAD&hash=item34a17ba721:g:-vEAAOSwHC9j~w1b&itmprp=enc%3AAQAJAAAA0HoV3kP08IDx%2BKZ9MfhVJKkRFQJnWgtJlMiARcecAWtck1iE5yDAXp907m34NCa0tPsxKLX5VR%2FWRwH4g91KUCaAhdapOodzADD9G6j%2Fe9Zy3k8iXVATIUzQ81JPP3vgtGfD6leYZ8h8bMAwGQkFPyLlQj9qCufdZY0NfIWspCp7HjDx9AREz6LbupBOjz%2FwnpDeEniFor5HqSEodjInaS9Q7H4cE8y0T%2FL8GtcZOIHneBFC6JfMYddr26mLNHFteykVr2Y3OAayBTHwINvXPh4%3D%7Ctkp%3ABk9SR8DBlPKCZQ

I attached a photo showing alarms and overview of the Sinumeric.  We replaced that board from the link but nothing happened. Maybe someone can help ? What can be faulty in this hardware. ?

Rest of the alarms I know how to resolve, but this one is blocking me from moving on. 

 

Check you drive on the right side of CCU, you can see 6SN1123-1AB00-0AA1, Siemens call drive power section , we can call it drive box

see picture as ref

tkaczu277

First of all thank you for the answer.

What do you mean by drive box ? Sorry for my silly question.