Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

2000 258 no text available SinONE

Created by: U_5663b25e-46ab-4d64-ac42-37cb9f49f7f5 at: 1/30/2025 12:08 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/30/2025 12:08 PM	Rate (0)
U_5663b25e-46ab-4... Joined: 7/20/2023 Last visit: 1/30/2025 Posts: 1 Rating: (0)	What does the warning "2000258 <no text available>" mean on the Sinumerik One, PPU 1740? I looked in a diagnostic manual and did not find this warning strip. We are unable to optimize the axis, as shown in the attached image, "Invalid feed start value", pressing start, nothing happens. Thank you in advance for your help, we have already done many tests but without success. Attachment 2000 258 no text available SinONE.jpg (122 Downloads)

Suggestion To thank Quote Answer

1/31/2025 7:57 PM	Rate (0)
nulizhang Platinum Expert Joined: 10/17/2007 Last visit: 9/4/2025 Posts: 4431 Rating: (398)	You are using a new machine or you are doing set up the new system? U_5663b25e-46ab-4d64-ac42-37cb9f49f7f5 What does the warning "2000258 <no text available>" mean on the Sinumerik One, PPU 1740? I looked in a diagnostic manual and did not find this warning strip. We are unable to optimize the axis, as shown in the attached image, "Invalid feed start value", pressing start, nothing happens. Thank you in advance for your help, we have already done many tests but without success.
	If you like my comments please use "Thank" bottom left or Rating Top right
Suggestion To thank Quote Answer

3/11/2025 8:39 AM	Rate (0)
Stanis777 Regular Member Joined: 4/5/2016 Last visit: 8/27/2025 Posts: 1 Rating: (0)	I have the same problem. I am doing set up the new mashine. Do anybody know the solution?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on