Navigation

CBC 10 - CAN communication

Created by: Rahul Singh at: 9/28/2010 3:20 PM (1 Replies)

9/28/2010 3:20 PM	Rate (0)
Rahul Singh Posts: 29 Rating: (0)	Hello, I am going to do a project in which i need to communicate with the B&R plc using the Can communication. I will be using CBC10 on Cu320. Please let me know the basic settings to be done. regards, Rahul
Rahul Singh Posts: 29 Rating: (0)
Suggestion To thank Quote Answer

7/10/2025 6:11 AM	Rate (0)
AutoGen_9387633 Joined: 7/10/2025 Last visit: 7/10/2025 Posts: 1 Rating: (0)	https://support.industry.siemens.com/cs/mdm/109740025?c=71883286667&dl=da&lc=en-KR

Suggestion To thank Quote Answer

Share this page:

Share this page on...