Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Unable to download to HMI

Created by: AutoGen_6a234 at: 7/31/2025 9:22 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/31/2025 9:22 AM	Rate (0)
AutoGen_6a234 Joined: 7/30/2025 Last visit: 8/4/2025 Posts: 7 Rating: (0)	I am trying to download to the HMI but keep on getting this error, (Going online: the HW configuration of the HMI_RT_1 was changed but it was not compiled and loaded yet. The shown diagnostics is possibly inconsistent or wrong.). I have checked the device version and have even updated the image firmware file and matches selected in program, any help would be appreciated on this.

Suggestion To thank

7/31/2025 11:31 AM	Rate (0)
Hati Platinum Member Joined: 9/21/2012 Last visit: 9/3/2025 Posts: 4695 Rating: (509)	Don't post the same question twice.
	Last edited by: Hati at: 07/31/2025 11:34:02
Suggestion To thank

7/31/2025 11:39 AM	Rate (0)
Moderator_Lan Moderator Joined: 7/30/2024 Last visit: 8/29/2025 Posts: 936 Rating: (16)	Topic closed because the question has been posted twice. The active topic can be found here: Unable to download HMI project to HMI Kind regards, Moderator_Lan

Suggestion To thank

|

Share this page:

Share this page on...

Follow us on