Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

PCS7 Faceplates do not show text

Created by: catalunya1714 at: 11/16/2006 5:27 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

11/16/2006 5:27 PM	Rate (0)
catalunya1714 Bronze Member Joined: 3/7/2006 Last visit: 11/5/2024 Posts: 37 Rating: (2)	With WinCCrunning, if I openthe standard faceplates (motor, valves...) some text (buttons, labels...) is shown for the first second, but then disappear. Thereare also more texts that are not shown, like in the sequences. Others projects running in the same machine work fine. Attachment faceplates_without_text.jpg (671 Downloads)

Suggestion To thank Quote Answer

11/16/2006 7:47 PM	Rate (0)
kiran Posts: 7 Rating: (0)	hi if you r having any previous project ,then u copy the satandard motor and valve pdls( around 5or 6) pdls to the existing project and then run the hmi. i hope this can work hope u send the feedback to me
kiran Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

11/16/2006 8:43 PM	Rate (0)
Nemo Posts: 3149 Rating: (172)	Hi which PCS7 version are you using? Which microsoft operating system is installed? Which language-settings are there for windows / wincc? Are there any entries in your Wincc logfiles? Does this happen in a NEW project as well? nemo
Nemo Posts: 3149 Rating: (172)
Suggestion To thank Quote Answer

11/24/2006 11:43 AM	Rate (0)
catalunya1714 Bronze Member Joined: 3/7/2006 Last visit: 11/5/2024 Posts: 37 Rating: (2)	I've solved the problem, creating another os and copying all pdl to the new one. Thanks for the help. Andreu

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on