Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Basic Panel Screen saver tag???

Created by: ottolaan at: 12/13/2011 10:58 PM (3 Replies)

Rating (1)

Thanks 1

4 Entries

12/13/2011 10:58 PM	Rate (0)
ottolaan Posts: 2 Rating: (0)	Hi, I am wondering if there is a tag that i can use to disable the screen saver on a KTP 400 when a plc event occurs. Let's say i have an alarm event in the S7 1200 that triggers a screen to pop up. If the screen saver is active, i want it to stop for a moment and show the current screen. Thanks in advance for any suggestions.
ottolaan Posts: 2 Rating: (0)	Last edited by: ottolaan at: 12/13/2011 10:58 PM
Suggestion To thank Quote Answer

12/14/2011 4:11 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, Which alarm class do you use for your messages? alarm class ( Errors or Warnings) Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

12/14/2011 8:42 PM	Rate (0)
ottolaan Posts: 2 Rating: (0)	Tweety, I'm not familiar with class alarms. I'm just using some space in a screen to make a alarm text visible when it occurs. The thing is, when the screen saver is on, it stays on when the alarm is active. I need to see if there is a tag for the screen saver to turn it off when alarms exist. Thanks, Otto
ottolaan Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

12/15/2011 4:06 PM	Rate (1)
Tweety Posts: 3037 Rating: (192)	Hello, ottolaan The thing is, when the screen saver is on, it stays on when the alarm is active. I need to see if there is a tag for the screen saver to turn it off when alarms exist. Thanks, Otto This is not possible with a Basic Panel. You can dim with a tag the light at a Comfort Panel. Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users zdfhsadgzx

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Alarms Messages

Follow us on