Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

turn on IPC 227D

Created by: fasacrifice at: 7/31/2012 11:27 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

7/31/2012 11:27 PM	Rate (0)
fasacrifice Regular Member Joined: 5/25/2012 Last visit: 2/10/2023 Posts: 11 Rating: (0)	Hi All, I'm new to PC based automation systems. As our company we'd like try and explore the options with IPCs. We just got an IPC 227D with 4GB CF card, Windows Embeded Standard 7+SP1 installed. I have few newbie questions; 1) [schnippschnapp] 2) The manual says when it's needed, shut off the IPC from the start menu like any other windows. But after shutting down, the only way to turn it on is the mechanical switch on the IPC. I need to turn it off then on. is there any other method? Thanks in advance.
	Last edited by: O_Moderator at: 8/1/2012 1:25 PM new subject after splitting from /tf/WW/en/Posts/78233#top Last edited by: fasacrifice at: 7/31/2012 11:28 PM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users CERUTU

8/1/2012 2:57 PM	Rate (0)
grg Experienced Expert Joined: 3/2/2009 Last visit: 8/6/2025 Posts: 94 Rating: (8)	Hello fasacrifice, you can use Wake on LAN2. Regs, grg

Suggestion To thank Quote Answer

8/1/2012 3:53 PM	Rate (0)
TomDeWou Platinum Member Joined: 11/15/2006 Last visit: 3/26/2025 Posts: 1319 Rating: (176)	I don't know exactly, but what happens after Power Loss (unplug the power connector once and plug again)? I guess that inBIOS you could set the system to POWER ON after power loss - which might be a solution though.
	Have Fun! TomDeWou
Suggestion To thank Quote Answer

7/2/2014 4:51 AM	Rate (0)
CERUTU Posts: 1 Rating: (0)	Same Here Bro... I using Industrial PC SIMATIC IPC477D , And they also forgotten to put Turn ON Button ! I have to use toogle switch behind the IPC to turn it On we back to the ancient time ! Siemens Need "Steve Jobs" at IPC Design Product
CERUTU Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on