Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

SIMODRIVE 6RA24 Fault- no display

Created by: Harp at: 9/8/2006 5:25 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/8/2006 5:25 PM	Rate (0)
Harp Posts: 17 Rating: (0)	Guys Got a 6ra24 that lights the ST led (fault) on power up but no 7 segment displays are lit to give an indication of the fault - power rails on top card seem to be ok ie 10v -10v 24v and 5v checked ok. anyone got any thoughts on the possible problem cheers paul h
Harp Posts: 17 Rating: (0)
Suggestion To thank Quote Answer

11/8/2006 12:39 PM	Rate (0)
ambrish Bronze Member Joined: 11/8/2006 Last visit: 8/3/2025 Posts: 57 Rating: (4)	It looks control card defective. [:cry:] Regards Ambrish

Suggestion To thank Quote Answer

11/1/2007 9:03 PM	Rate (0)
GayleLabs Posts: 2 Rating: (0)	Symilar problem with a 6RA2725-6da57 only no leds no segments, supplies ok. Does anyone have acess to schematic info? TNX Barry
GayleLabs Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on