Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Diagnosis of DP-Slave

Created by: Kramps at: 2/15/2008 3:02 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/15/2008 3:02 PM	Rate (0)
Kramps Posts: 66 Rating: (2)	Hello, I am working with an FM458-1DP and I would like to generate an alarm on the disconnection of a DP-Slave. Which CFC block can suit for this and how can I use it to know if my DP-Slave is active on the network or not ? Thanks for answering, Best Regards, Kramps
Kramps Posts: 66 Rating: (2)
Suggestion To thank Quote Answer

2/15/2008 4:45 PM	Rate (0)
miami Platinum Expert Joined: 8/31/2005 Last visit: 8/8/2025 Posts: 2198 Rating: (331)	Kramps I am working with an FM458-1DP and I would like to generate an alarm on the disconnection of a DP-Slave. Which CFC block can suit for this and how can I use it to know if my DP-Slave is active on the network or not ? Kramps Hello Kramps, DPDIAG.DLx (X=1 to 4) should be your friend. Look here (Chapter2.2.1)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on