Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

struc L ver 3.x

Created by: DUTTA at: 3/29/2008 4:58 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

3/29/2008 4:58 PM	Rate (0)
DUTTA Posts: 102 Rating: (1)	Dear Experts, I m having one old laptop which includes Struc L v3.x. also I m having a Hardware License. but in Dos Mode I dont know how to open this application. I mean what I m trying is as follow: in MSDOS mode 1) after going to prompt C:\Struc\user0 2) striking "Struc" 3) but after it starts the application and terminate immediately by giving erro like D1-19 version incompitible. my question is when I m striking STRUC command do I have to give other arguments or project path name also? please help me? Ankur
DUTTA Posts: 102 Rating: (1)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Geno

4/1/2008 12:53 PM	Rate (0)
miami Platinum Expert Joined: 8/31/2005 Last visit: 8/8/2025 Posts: 2198 Rating: (331)	I I remember right, You dont have to change into the ..\user0 directory. But you can add the user( directory)you want to use, e.g. struc 3 (..\user3) In the STRUC user manual is a error list. Look there for "D1-19"
	Last edited by: miami at: 4/1/2008 12:55 PM
Suggestion To thank Quote Answer

4/1/2008 2:16 PM	Rate (0)
DUTTA Posts: 102 Rating: (1)	Dear Miami, I dont have that Struc L V3.x manual. what I have is Struc V4.2.7 manual. As I was having too many old programs which were developed in V3.x and I could not convert them with V4.2.7 So I need to run this version and I want to modify something. Please if u have this manual can u send it to me? with best regards, Ankur
DUTTA Posts: 102 Rating: (1)
Suggestion To thank Quote Answer

4/3/2008 11:37 AM	Rate (0)
miami Platinum Expert Joined: 8/31/2005 Last visit: 8/8/2025 Posts: 2198 Rating: (331)	Hello, Sorry, I don't have a manual. You should contact the Hotline and ask there for it.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on