Skip to Content

Register Login

Default Header

(header konnte nicht geladen werden)

Navigation

Power supply for PLC

Created by: Amrich at: 5/15/2010 4:01 PM (11 Replies)

Rating (0)

Thanks 0

12 Entries

Entries per page: 10 | all

5/15/2010 4:01 PM	Rate (0)
Amrich Posts: 9 Rating: (0)	Hej there... I'm using PLC for the first time and I have one problem... I have just Siemens Logo PLC and PC cable to connect PLC and PC... I don't have power supply gor PLC... Do I have to use just https://www.automation.siemens.com/mcms/power-supply-sitop/en/Pages/24vdc-power-supply.aspx or I can use something else? Something that gives 24V... Please help...
Amrich Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

5/15/2010 5:11 PM	Rate (0)
umencho Diamond Member Joined: 3/21/2006 Last visit: 3/30/2025 Posts: 10239 Rating: (1183)	Hello, Of course you could use any power suply which cover requirements. But I suggest you to use SITOP family for any ranges in industrial applications. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

5/15/2010 5:51 PM	Rate (0)
Amrich Posts: 9 Rating: (0)	Thank you... But I can't find any SITOP in my town... but I will try to find it...
Amrich Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

5/16/2010 10:50 AM	Rate (0)
Amrich Posts: 9 Rating: (0)	Can I use something like this? It's adapter 24V DC and 2.2A... http://static.pik.ba/galerija/2010-05/slika-73939-2010-05-1273788362-velika.jpg
Amrich Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

5/16/2010 10:57 AM	Rate (0)
IBN-Service Posts: 8946 Rating: (1000)	Amrich Can I use something like this? It's adapter 24V DC and 2.2A... http://static.pik.ba/galerija/2010-05/slika-73939-2010-05-1273788362-velika.jpg It seems to be a power supply of some notebook or monitor or something like that, right? Than it will be stabilized and will be good for LOGO!
IBN-Service Posts: 8946 Rating: (1000)
Suggestion To thank Quote Answer

5/16/2010 11:28 AM	Rate (0)
Amrich Posts: 9 Rating: (0)	Like you wrote, for notepad I think... But 'cause this output can't be plug into PLC, I have to cut out this, take wires and screw it into input of PLC... ?
Amrich Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

5/16/2010 11:55 AM	Rate (0)
umencho Diamond Member Joined: 3/21/2006 Last visit: 3/30/2025 Posts: 10239 Rating: (1183)	Hello, Basically cut and connect after that wires. But really isn't be possible to find in your place another power suply. Just simple 220VAC/24VDC converter around 2A? If you will use that power suply, just be carefull which wire is +24V. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

5/16/2010 2:56 PM	Rate (0)
Amrich Posts: 9 Rating: (0)	What kind of output (end) that converter has? It looks like...?
Amrich Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

5/16/2010 3:12 PM	Rate (0)
umencho Diamond Member Joined: 3/21/2006 Last visit: 3/30/2025 Posts: 10239 Rating: (1183)	If you ask about my suggestion - this is simple transformer with extra coils for output 24V plus one rectifier. These are 2 wires. You could find these kind of suppliers in all stores for electrical parts.

Suggestion To thank Quote Answer

5/16/2010 3:16 PM	Rate (0)
umencho Diamond Member Joined: 3/21/2006 Last visit: 3/30/2025 Posts: 10239 Rating: (1183)	If you ask about my suggestion - this is simple transformer with extra coils for output 24V plus one rectifier. These are 2 wires. You could find these kind of suppliers in all stores for electrical parts. My idea is don not destroy notebook power supply. For sure this is not the chipest decision. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

5/16/2010 3:26 PM	Rate (0)
Amrich Posts: 9 Rating: (0)	Adapter isn't my yet.. So I can "kill" it, with no regrets:) Ok... Tomorrom I'm going to look for it in these shops here.. Thank you soooo much...
Amrich Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

5/16/2010 6:19 PM	Rate (0)
IBN-Service Posts: 8946 Rating: (1000)	Amrich Like you wrote, for notepad I think... But 'cause this output can't be plug into PLC, I have to cut out this, take wires and screw it into input of PLC... ? Yes. But take care of + and -, like Umencho already had said!
IBN-Service Posts: 8946 Rating: (1000)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on