Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CP443-1EX11-0XE0 with MB_REDCL and MB_CPCLI blocks

Created by: Vivek_PV at: 6/20/2022 7:51 AM (5 Replies)

Rating (0)

Thanks 0

6 Entries

6/20/2022 7:51 AM	Rate (0)
Vivek_PV Member Joined: 1/19/2019 Last visit: 3/4/2023 Posts: 3 Rating: (0)	Dear Sir, We are also working on a similar project with same CP card. The firmware version of CP card is V2.6 and CPU is 414-H (414-4HM14-0AB0) firmware V4.5.2. We are using MB_REDCL and MB_CPCLI blocks. Regards Vivek ------------------------------------------------------------------------------------------ Split from CP443-1EX11-0XE0 License.
	Last edited by: Jen_Moderator at: 06/20/2022 08:59:42 New subject after splitting
Suggestion To thank Quote Answer

6/20/2022 7:55 AM	Rate (0)
Wüstenräuber Gold Expert Joined: 10/3/2008 Last visit: 8/28/2024 Posts: 961 Rating: (124)	Hi, this CP 1EX11 is not possible. You must use a newer CP. The reason is the internal function FC10 AG_CNTRL. This old CP doesn't support this FC, but the modbus block needs it. Wüstenräuber

Suggestion To thank Quote Answer

6/20/2022 9:11 AM	Rate (0)
Vivek_PV Member Joined: 1/19/2019 Last visit: 3/4/2023 Posts: 3 Rating: (0)	Dear Sir, This is an existing system and is working as Modbus server using MB_REDSV (V2.3) and MB_CPCPSRV(V2.2). So will it work with older versions of these blocks? Or can we get old programming blocks which were used for programming these CPs?

Suggestion To thank Quote Answer

6/20/2022 9:31 AM	Rate (0)
Wüstenräuber Gold Expert Joined: 10/3/2008 Last visit: 8/28/2024 Posts: 961 Rating: (124)	No, there are no older CP RED blocks for CP 1EX11.

Suggestion To thank Quote Answer

6/20/2022 10:45 AM	Rate (0)
Vivek_PV Member Joined: 1/19/2019 Last visit: 3/4/2023 Posts: 3 Rating: (0)	Thank you for the reply. If not possible with Modbus Red blocks, can i get the blocks used for programing 1EX11 CPs if available?

Suggestion To thank Quote Answer

6/20/2022 10:47 AM	Rate (0)
Wüstenräuber Gold Expert Joined: 10/3/2008 Last visit: 8/28/2024 Posts: 961 Rating: (124)	No, unfortunately there are no longer modbus blocks for CP 1EX11.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on