Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

If anyone have got manual "OPEN MODBUS ''TCP Communication via CP343-"1" with any sample program?

Created by: viper1333 at: 10/29/2009 5:49 PM (2 Replies)

Rating (0)

Thanks 2

3 Entries

10/29/2009 5:49 PM	Rate (0)
viper1333 Posts: 1 Rating: (0)	Hello Everyone! Just like U I'm trying to connect Magelis XBTG 5335 with VIPA (daughter company of Siemens) 314-6CG03 over TCP/IP. From Schneider I heard that it's possibe only with MODBUS TCP/IP even when in Vijeo Designer there is possibility to choose TCP/IP (without MODBUS word in name). I don't know why if it doesn't possible for this OP and Siemens in this way. If the MODBUS TCP/IP is the only possible solusion then where can I get blocks or libraries that using to convert Siemens TCP/IP protocols to Shneiders (I've got cpu with integrated Ethernet Port)? If anyone have got manual "OPEN MODBUS 'TCP Communication via CP343-¨1" with any sample program? Thanks for any response and help. Attachment siemenscpu300.JPG (781 Downloads)
viper1333 Posts: 1 Rating: (0)	Last edited by: CS Moderator at: 10/30/2009 10:50 AM correcting subject Last edited by: O_Moderator at: 10/30/2009 10:24 AM new subject after splitting
Suggestion To thank Quote Answer

10/30/2009 11:57 AM	Rate (0)
Kaulquappe Posts: 3093 Rating: (323)	Hello Viper, guys of Siemens won't be amused when you announce that VIPA is a daughter of Siemens. In fact VIPA is a competitor of Siemens. You should know, that you lose Siemens warranty when using VIPA modules in a SIMATIC PLC. However, back to your question.You can findthe manual for ModbusTCP via NCM CP here. Regards, Kaulquappe
Kaulquappe Posts: 3093 Rating: (323)	Last edited by: Kaulquappe at: 10/30/2009 12:27 PM
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users S_Moderator Wüstenräuber

10/30/2009 12:32 PM	Rate (0)
Wüstenräuber Gold Expert Joined: 10/3/2008 Last visit: 8/28/2024 Posts: 961 Rating: (124)	Hi viper, in the link by Kaulquappe are the old manuals. I hope it will be actualized soon. I attach the current manual (V4.0). Wüstenräuber Attachment Open Modbus TCP for NCM_CP English.pdf (1776 Downloads)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

ModbusTCP

Follow us on