Industry Online Support
Technical Forum
Navigation
Rating 
Thanks 0
2 Entries
| 1/14/2010 8:02 AM | |
|
Posts: 13 Rating:
|
Hello again, I have good news, yesterday I final buy new CP 343-1CX10 V2.2 . I have tested it with Circutor CVM 144, because I lent to friend PAC. I have already successfully read data from it !!! (Thank you for help !!!). Now I have just one problem, the maximum number of parameter that can be read in one transmission (one telegram) is 20 (for Circutor). So now I can read data from START_ADDRESS = 0 and LENGHT = 40 (that is max). And I get data in DB11 from DB11.DBW0 to DB11.DBW39 . So now I want to send another "second" telefrom to read data from register 39 to 80, then from 79 to 120 and so on. And save it second telegram to DB12, third in DB13 .... What and where must I add in program that will work. In attachment I am sending a program that work perfect. Maybe stupid question but I am a beginner. Thank you for help Splitted from My goal is to collect data from PAC3200. AttachmentMobus.zip (869 Downloads) |
Last edited by: O_Moderator at: 6/21/2010 10:47 AMnew subject after splitting |
|
Follow us on