Industry Online Support
Technical Forum
Navigation
Problems with 502 port in 6GK7443-1EX20-0XE0
Created by: ThiagoLP at: 7/31/2019 11:59 AM (3 Replies)
Rating 
Thanks 0
4 Entries
| 7/31/2019 11:59 AM | |
|
Posts: 3 Rating:
|
Kaulquappe, I'm facing problems with 502 port in 6GK7443-1EX20-0XE0 FW 2.0 through a Modbus TCP connection. In our drive log appears error 10061. Sometimes changing CPU status (Run => Stop => Run) solves the problem. But sometimes doesnt. Do you recommend upload the firmware? Best Regards! ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 07/31/2019 13:51:38New subject after splitting |
|
| 8/13/2019 3:24 PM | |
Joined: 3/21/2018 Last visit: 2/17/2022 Posts: 5 Rating:
|
Try to use port 102 and check. |
| 8/26/2019 2:10 PM | |
Joined: 4/28/2015 Last visit: 10/30/2024 Posts: 10585 Rating:
|
Hello, hope not here on MB/TCP (Port 102)... |
|
With best regards... |
|
Follow us on