Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinLC RTX v4.6 and PCS7 v9. What is Modbus library need?

Created by: alxndrch at: 9/9/2019 7:10 AM (1 Replies)

Rating (0)

Thanks 1

2 Entries

9/9/2019 7:10 AM	Rate (0)
alxndrch Experienced Member Joined: 11/22/2017 Last visit: 12/5/2023 Posts: 19 Rating: (3)	Hello everyone! I have a Simatic PC BOX with WinAC RTX v4.6 and PCS7 v9. I need to to poll the sensors through ModbusTCP. What is ModbusTCP library version i need? In this place: https://support.industry.siemens.com/cs/at/de/view/104946406 for WinAC RTX recommend use 2XV9450-1MB02, but it have a replacement with 6AV6676-6MB20-3AX0. What's library true? Thanks everyone!
	Last edited by: Jen_Moderator at: 09/09/2019 13:45:09 Optimized link.
Suggestion To thank Quote Answer

9/9/2019 1:34 PM	Rate (0)
Wüstenräuber Gold Expert Joined: 10/3/2008 Last visit: 8/28/2024 Posts: 961 Rating: (124)	Hi, 2XV9450-1MB02 is still available and valid for WinAC RTX and for older CPUs. The demo version is available here: https://support.industry.siemens.com/cs/ww/en/view/109752686. Wüstenräuber

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users alxndrch

|

Share this page:

Share this page on...

Follow us on