Hi, guys

I have S210 and S7-1500 1517TF-3PN/DP with TIA Portal V17

When I was One Button Tuning

I have some error like attached picuture

AC Power and DC Power is good

What do I check in this case anything else

Best regards,

Lee 

Hello,

I think there is an error in your wiring. Please check following FAQ: 

https://support.industry.siemens.com/cs/ww/en/view/10976786

TechSupport for SINAMICS S210

Hello,

I think there is an error in your wiring. Please check following FAQ: 

https://support.industry.siemens.com/cs/ww/en/view/10976786

Best regards

TechSupport for SINAMICS S210

 Aboved link is not working

Pls send me again

Best regards,

Lee

Hello,

here is the correct link: 

https://support.industry.siemens.com/cs/ww/en/view/109767864

Closed cause question posted twice.

The second thread with the subject Infeed not ready is published within the conference SINAMICS S.