Best regards. First I want to say I speak little English and I'm helping with Google Translate.

I have a question, you know there is a machine that has a FESTO pneumatic Festo CPV Module DI01 (DI01-GE-CPV10-8). There are three outputs that are not used and I used to turn a valve. But I find no information on how to program the outputs of the pneumatic module in the SIMATIC Manager

Specifically I would like to know how you programmed in step 7, the Festo CPV DI01

I’d appreciate it guided me a little.

Thanks in advance.

I don't fully understand your question, but I think you want to add valves on existing module, in yet existing program.
You have to open hardware configuration and you will find your module in profibus network, click on it and there it will be shown digital outputs of module, write address on a paper andin project manager do cross-reference and find were these outputs (and how) are used.

 GSD file (CPV-ASI)

Chehombing

Hi,

Update your hardware to config your festo.

Attached the Festo GSD file.

Cheers...

Ando Sihombing