SiePortal

The integrated platform for your product selection, buying and support workflow - bringing together Industry Mall and Online Support.

Products & Services
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Support Support
{{(apiData.Support | filter:{'rank':1}:true)[0].title}} Support
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
MySiePortal MySiePortal
{{(apiData.MySiePortal | filter:{'rank':1}:true)[0].title}} MySiePortal
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Cart ({{apiData.CartCount}})

Navigation

S210 (New) Failsafe Digital Input

11/14/2023 2:31 PM	Rate (0)
Hexonium Joined: 11/14/2023 Last visit: 5/11/2025 Posts: 2 Rating: (0)	For an installation being developed, an emergency stop is attached to the failsafe inputs of the 6SL5310-1BE11-5DF0. When the emergency stop is pressed, a signal light connected to a DQ module of an S7-1500 (both not failsafe) must be illuminated. For this, the S7-1500 must know when the emergency stop is activated or not. Can this signal be read, via additional wiring or with a telegram?
	Last edited by: Hexonium at: 11/14/2023 14:40:08
Suggestion To thank Quote Answer

11/14/2023 2:43 PM	Rate (0)
TechSupport for S... Posts: 50 Rating: (4)	Hello, in your case I think you need to evaluate the signal of the stop directly in the CPU. Best regards TechSupport for SINAMICS S210
TechSupport for S... Posts: 50 Rating: (4)
Suggestion To thank Quote Answer

11/14/2023 3:01 PM	Rate (0)
Hexonium Joined: 11/14/2023 Last visit: 5/11/2025 Posts: 2 Rating: (0)	So connecting the emergency stop in parallel to both the PLC and the drive? On the drive to stop the servomotor and on the PLC to turn on the signal light. Would this really be the only solution?

Suggestion To thank Quote Answer

Share this page:

Share this page on...