Dear Team,

I'm currently working on a project that involves installing a Siemens Sitrans LU150 for fuel level transmission, which will be integrated with Desigo CC V6. I would greatly appreciate guidance on:

1. Installation procedure for Sitrans LU150

2. Integration steps with Desigo CC V6

3. Recommended cable type for seamless connectivity

Any additional resources, documentation, or expert advice would be highly valued.

Thank you in advance for your support.

Best regards

Hello,

very sry but I see your expectations from Forum very high. Problematic isn't just few sentencies or pages but specific work with cfg and instalation. generally i recommend good documenttaion to each of your products, especially radar for level measurement. You need be familiar with all about, it is not only about some recommendation as you expect. As I don't have experience with building technology (especially that SW) some advices here can be lot of effort to describe to you so you can be satisfied. Mostly you need do research of all documentations and then come here with specific problem, then Forum can be helpful if any of experienced users will see your Topic. Good luck...

Hi ionik,

I am not sure we can assist you particularly well in the forum. This is something that either needs to be done locally with our sales experts, or via a support request (see my signature).

Generally, unless we are talking about heavy fuel oil, I am not sure that ultrasonics is the right technology here. More information about the application would enable us to say for sure.

Richard Deal | LevelWac

Hi ionik,

alternatively, you can find the LU150 instruction manual on SiePortal here: https://support.industry.siemens.com/cs/de/en/view/109807460

Hope that this helps!