Hello,

After some research i found the patch for wincc flexible 2008 SP5. This patch should fix the integrity problems with step 7 V5.7+ SP1

Integrity problems step 7 V5.7:

https://support.industry.siemens.com/cs/ww/en/view/109798574

Hotfix WinCC flexible 2008 SP5:

https://support.industry.siemens.com/cs/ww/en/view/109757233

After installing the patch and starting Step7 V5.7+SP1 again there is no change. There is still the same problem. when i check installed software i can see there is simatic WinCC flexible 2008 SP5 UP2, patch step 7V5.7.

Does somebody have exprerience with this problem? And maybe have a solution for this problem?

Hi,

perhaps you have other packages who are not up to date? Did you check this? What kind of message do you get? 

Regards,

Towome

Hello,

It may the SP1 of Step7 5.7 to create the issue...By default it shouln not. But becasue WinCC Flex 2008 is involved...

Write to siemens support.

Br,

Hristo Mihalev

Hi,

try to update Step 7 V5.7 SP1 to newest Hotfix 4.

Download Hotfix 4 STEP 7 V5.7 SP1 / STEP 7 Professional 2021 SR1

Regards,

Towome

 This solved my issue! Thank you

Murof

Hello AutoGen_1168223

for me it works

It is very important, you install 2008 SP5 UPd2 and then after this the Integrity patch

-> And the most important thing is to export the integrity patch to a folder without a blank or special characters.

-> for example a good folder is C:\temp\

the Patch has a little bug if you start it from a folder with a blank then it does not work (like c:\temp\New Folder)

I hope this helps

bye Murof