Hi everybody,

6ED1052-1MD08-0BA1   Logo 12/24RCE

FW 1.83.02

I used to use the cursor key to display temperatures and other results.

I cant get it anymore. In my opinion is a hardware failure. I carried on the FW upgrade, hoping the best, without success.

Do you have any comments?

I attached my routine.

Thanks in advance

Martin

 Hi ixo65,

your comment is very clear. I'll program it in my routine.

Thank you.

Martin

ixo65

The problem is that you only want to activate a message text when you press the cursor keys (with ESC).However, a message text must be active so that the program can use the combination of ESC and cursor keys.If no message text is active, pressing the ESC key is evaluated as calling up the system menu.

In your case this means: Program a message text with the lowest priority (0) that is always active.In the message text you just write e.g. "Start screen" or your company name or whatever.

 Hi ixo65,

unfortunately it didn´t cause any effect. Neverthless thanks for your help. Ill post additional problems I found during the checking.

I's about AI ripple. I'll post this issue on a new thread.

I´t is my first LOGO project, so i think I'm not doing the right things.

Regard

Martin 

MartinFrattini

 Hi ixo65,

your comment is very clear. I'll program it in my routine.

Thank you.

Martin

ixo65

The problem is that you only want to activate a message text when you press the cursor keys (with ESC).However, a message text must be active so that the program can use the combination of ESC and cursor keys.If no message text is active, pressing the ESC key is evaluated as calling up the system menu.

In your case this means: Program a message text with the lowest priority (0) that is always active.In the message text you just write e.g. "Start screen" or your company name or whatever.

 

Yesss, it worked!!

Thanks!