IgorProgramador

Hi Guys, I am having some problems comissioning the F-DI 8x24VDC HF with the 1510 SP F-1 PN. The Diagnostic Status is: 

The F-source address in the retentive memory (e.g. coding element) is different to the F-source address in the F-parameter block or has an invalid value.

Solution:

Perform the F-address assignment.

 Assing the F-address to the safety cards. Right click on the rack and select Assign PROFIsafe address.

Hi,

if this menu is not available, the ET200SP was configured via GSD(ML). In this case, S7-FCT is necessary.

Why is the selection "Assign PROFIsafe Address" missing in the pop-up menu for an F device?

regards

sancruz