Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Know how protection

Created by: ShahinM at: 7/6/2006 9:42 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

7/6/2006 9:42 AM	Rate (0)
ShahinM Silver Member Joined: 11/8/2005 Last visit: 6/5/2024 Posts: 335 Rating: (3)	I want to know,how can I put "know how protection" on OB1 or one of FBs?This option is not active in OB1 or FBs.How can I activate this option in the OBs or FBs properties?

Suggestion To thank Quote Answer

7/6/2006 9:50 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/11/2024 Posts: 8768 Rating: (1170)	Hello, Have You seen the following faq: http://support.automation.siemens.com/WW/view/en/10025431 Hope this will help You. Best regards, Wizard

Suggestion To thank Quote Answer

7/8/2006 9:30 AM	Rate (0)
ShahinM Silver Member Joined: 11/8/2005 Last visit: 6/5/2024 Posts: 335 Rating: (3)	If I want to enable other options suchas "Non Retain" or "Unlinked" in properties of any OBs or FBs,What should I do?Again these options arenot active in properties.

Suggestion To thank Quote Answer

7/8/2006 4:49 PM	Rate (0)
Late Platinum Expert Joined: 1/7/2006 Last visit: 11/17/2023 Posts: 2705 Rating: (318)	[quote user="SM"]If I want to enable other options suchas "Non Retain" or "Unlinked" in properties of any OBs or FBs,What should I do?Again these options arenot active in properties. SM, If you choose this properties and generate a source then you see it directly in the source.. [:blush:] DATA_BLOCK DB 1 TITLE = VERSION : 0.1 KNOW_HOW_PROTECT UNLINKED READ_ONLY NON_RETAIN STRUCT DB_VAR : INT ;//Temporary placeholder variable END_STRUCT ; BEGIN DB_VAR := 0; END_DATA_BLOCK It is easy like that.... [8)]
	I hope that the answer will help, if you have still questions, don't hesitate to ask me. All the best, Late Never say never, think in solutions, not in trouble......
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on