Hi all,

Where can i find the GSD files of the ET200SP safety components?

Thanks in advance,

Xander

Hi,

what kind of components do you mean?

Normally you can configure ET200SP in TIA with HW catalog. There you find moduls like F-DI.

You will need Simatic Step 7 Safety .

Does that answer your question?

Regards,

Towome

hi Xander. 

if Safety and the HSP`s are installed with the newest version, you should find it in HW-Catalogue.

The easiest procedure is to check it with TIA Updater. Check also for availabel Hardware Updates.

regards, 

Thanks, but are there also GSD files for the FIO, IO and the CPU's of the ET200SP?

Hello,

for F-I/O no.

PROFINET GSDML Files fur PLC ET200SP can be created inside the TIA Portal depends on the i-Device configuration of the PLC.

Regards

Christoph

Have a look in the TIA-manual:

STEP 7 Professional V13.1

editing devices and networks -> chapter 1.4.12.4 -> Configuring I-Device, page 1184(1844)

hope this helps,

regards,

Hi,

We have Tia Portal with safety, but we need those GSD files for our system simulation. So we need those information outside of TIA portal.