Hi,

We have a problem on our6SN1118-0AA11-0AA0card.

there is an"ERROR CODE 7"displayed on the card and we don't know what the error means.

Badly need help on how to eliminate this error. What are the things needs to be done?

Thank you very much in advance....

 I attache all error code list. if you have good m/c yesterday and this error just happen, for old m/c possible mechanical issue --that means the motor wants to run but mech. jammed motor no power to run ( ball screw not moving) until Siemens drive speed controller to the limit,

check and feed back

VasyaPetrov12081982

Hi,

We have a problem on our6SN1118-0AA11-0AA0card.

there is an"ERROR CODE 7"displayed on the card and we don't know what the error means.

Badly need help on how to eliminate this error. What are the things needs to be done?

Thank you very much in advance....

Hello VasyaPetrov12081982,

Please check the motor cable for any interruption, cable short circuit or ground fault if any, if axis mechanic found good, 

HTH.