I have this same problem! I have cloud data set to 'On Change' but it sends out information every 10 secs. Also the timestamp is wrong. I am in Australia and its always 10hrs ahead of time. I have the correct time zone set within the logo so it doesn't make sense to me.

I was expecting to only receive data when the state of the bits I'm watching change. It is annoying as I will have to write something at the other end to filter it out of the log, as well as add in the correct timestamp.

If anyone has solved this I would very much appreciate the solution!

Cheers, Simon.

Did anyone find out any information on this (or maybe a solution)?  I have the exact same problem.  Setting the Period to 5 minutes in the cloud data transfer settings jut results in 29 empty JSON packets (just timestamp) being sent every 10s, followed by 1 packet with data in it.  The empty JSON packets are a nuisance.

Some time ago I asked the support the same question. The answer was more or less the timestamp message send all 10s, is a LOGO! feature which can’t be changed.

In LOGO! manual the feature is documented:

„BM publishes LOGO! time data value every 10 seconds.“