I tried with password, without, I tried LOGO Logo logo LOGO! etc etc for 3 weeks I can not sort it out. I've installed Logo comfort on a different computer and tried to connect on different router.I think I tried everything but with no luck.

I am sure that my settings are good because I can without any issue connect to the webserver from any place that I want, It looks like the issue is only with Logo Comfort.

If you have any ideas what that could be please let me know!

Thank you!

My Logo : 6ED1052-MD08-0BA0

Logo Comfort: V 8.1.0 

Hello,

thank you for a quick reply.

I have only one logo in my network.

In access control I have checked the box to allow this. 

I always try without http://, with this I don't get a green bar.

To both questions : yes 

Ive changed the remote password and checked the box like 100 times. It asks you to set logo to RUN mode so I tried every possible combination. Also without password, with longer password etc

I have exacly as you wrote : (IP space : space Port) and it looks OK when you click "connect" (attached) but if you want to do something it asks for the dumb password...

ixo65

You entered by address a numerical IP address? Is this your DynDNS address?

Have you tried with the Password that yo have entered by the remote control in the access control?

 Yes it is my static IP adress. With this IP:8080 I can enter in any browser from any place the webserver and have a look what's my Logo doing.

I tried also with NO IP Dynamic DNS, it only converts the numerical to a written adress but the issue with password was the same.

I tried of course to put the password from remote access also from desperation I tried the PW from webserver and any possible combination of LOGO logo etc. 

I cannot understand how I can access the webserver with no problems but it is not possible to do anything in Logo comfort software...

Hello kill_gil 

Try with port 80 instead of 8080. It might work. 

Hello,

Perhaps the following points might help:

1-How do you enable and call the web server on LOGO! 8?

2-Port forwarding in the router setting"Remote side":

LOGO IP Address

Office PC"Local side":

http://public IP Address:8080

or

http://domain:8080

Online Tech

Hello,

Perhaps the following points might help:

1-How do you enable and call the web server on LOGO! 8?

2-Port forwarding in the router setting"Remote side":

External Port

8080

Internal Port

8080

To IP Address

LOGO IP Address

Office PC"Local side":

http://public IP Address:8080

or

http://domain:8080

 I've done everything according to the manual(as you wrote above) and as I said, Webserver works fine so for me Logo comfort should work as well. I also installed the Logo App and there is also everything fine! I can connect to the controller with no issues.

I got my Logo comfort on a CD so it is full and legal. I tried on different PC with no luck

ixo65

Hello kill_gil,

you came from Germany? I made my DynDNS with "FRITZ!Box-Dienst". If you a german boy, please send me a PM.

Then we talk more....

 I'm from Poland. The router is a "TP LINK"

If anybody has an Idea what is going on or what could I check next please let me know.

To summarise :

1. I'm able to connect throught Ethernet with my LOGO.

2. I'm able to acces webserver from any place that I want. I can assume that port forwarding in router settings is OK.

3. The Logo app is running and connecting with no issues(tested even abroad).

4. Dynamc DNS in Logo comfort software fails(attached). Green bar appers after clicking "connect" but then asks for password.

5. Access control settings and passwords are sorted out. No combination gives any results.

the simple Logo controller is really a challange

I suggest you to test port 102 or 103.

For me was OK on Logo7.

Hello

Finally, I can connect with DNS, I can help yo

@Kill_Gil, on the TP-link you must activated the DMZ function in the firewall and provide the IP from the LOGO.

I did the same until my TP failed , the replacement does not have a problem like this.

aly peralta

Hello

Finally, I can connect with DNS, I can help yo