if the value of the power is less than 32,768 W , that is perfect for me .

and if it is possible use the same Logo routine for voltages les than 260 Volt than it is even better , 

sir ,

you're right,I am 77 jears old and I am not familiar with data formats and Plc's .

The only thing I can make a small aplication with a plc .

But is it possible to make a routine for the power less than 32768 Watt ( 32,768 kWatt ) ?

If that is possible , that is the most important for me .

thanck You

If it is possible , the register addresses 16 power_returned , and the register 14 power_delivered

humbertje

If it is possible , the register addresses 16 power_returned , and the register 14 power_delivered

Yes, it's possible if the values are less then 32,768.

Example:

Transfer the HR15 to VW100. Then read the VW100 with a simple analog network input.
Transfer the HR17 to VW102. Then read the VW102 with a simple analog network input.

I have transferred HR 15 to VW100 , but when I read it , the value was 0 , then I read the VW102 ( the low word of the 32 bit register ) and the value is OK .

And HR 17 to VW104 and than reading VW106 with a NAI

the value will always be lower than 32768 , 
because the max power of my solar panels is 6000 watts,
that is perfect

Many thancks for the good help .   

humbertje

the value will always be lower than 32768 ,

because the max power of my solar panels is 6000 watts,
that is perfect

II'm happy for you that it's working now ...