Hello everyone,

I would like to seek for guidance for linking Siemens Logo 8 with KTP400 HMI. I have a project for monitoring tank level by using level transmitter (4-20ma output) & show the level on HMI by percentage. Currently I'm using TIA16. 

Looking forward for favorable reply. 

Thank you sir for your reply.

The sensor is using radar to measure the distance. So, i'm looking to set 4ma as 0% and 20ma as 100%.

As for the monitoring, it will give alarm if the level goes to 50%, 40% or 30% respectively as set on the HMI.

Sir,

This is how I design my HMI. If you have better suggestion, feel free to comment.