Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Debug information in autostart mode - NodeRED

Created by: Mronia at: 4/4/2022 12:49 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

4/4/2022 12:49 PM	Rate (0)
Mronia Regular Member Joined: 11/8/2021 Last visit: 4/24/2022 Posts: 24 Rating: (0)	Dear All, I am using IOT2040 with PLC Simatic1500. I have NodeRED in autostart mode. I check if the NodeRED is running using command: ps -aux \| grep node I have removed the current flow to start with empty one using commands: cd /home/root/.node-red rm flows_iot2000.json After rebooting I am able to open NodeRED editor in the browser however after adding one S7-in node configured with the PLC and one debug node, the NodeRED crashes after deploying. I would like to check what is wrong but in the autostart mode I don't have any information displayed in putty like I have while running manually. Is there a way to enable displaying current information from NodeRED in autostart mode?

Suggestion To thank Quote Answer

4/4/2022 2:29 PM	Rate (0)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/12/2024 Posts: 3345 Rating: (379)	Hi, this is a problem of the current S7 node version (3.x). There is a lot of entries about that already, e.g here. You need to install the version 2.1.1 of the node with npm install -g node-red-contrib-s7@2.1.1 Best regards!
	Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer

4/4/2022 4:08 PM	Rate (0)
Mronia Regular Member Joined: 11/8/2021 Last visit: 4/24/2022 Posts: 24 Rating: (0)	Hi, I found information about S7 node version. I will install the correct version. What about enabling debug information in autostart mode? Is it possibile?

Suggestion To thank Quote Answer

4/5/2022 7:42 AM	Rate (0)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/12/2024 Posts: 3345 Rating: (379)	Hi, there is no debug output in the terminal when having set node-red to autostart. You can find the debug information in the file /var/log/node-red.log. Best regards!
	Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SIMATIC IOT2000 Software

Follow us on