ChristophD

Have you read the OnlineHelp for the commandy?
You must enter the adress from the device from which you want to read the prameter andf the parameternumber odf the parameter you want to read.

vorapob

Dear Experts,

I use SIMOTION D425-2 dp/pn I would like to read drive parameter via

_readdriveparameter and _readdrivemultiparameter blocks but I don't know

how to use it.

Can someone recommend me please ?

Best Regards,

Vorapob

Question: instead of torturing your mind with these commands (that works perfectly but they need some tests and time), why don't you use the I/O direct accessing ? This is not the proper name and Christoph will kill me for that naming, but in the I/O tab you can access directly to the Sinamics parameters, in a cyclic manner, so if you don't have much much parameters to read, and you want an easy way, the I/O way would be suitable for you. I use it intensively and it is great

ChristophD

logadress is the adress of slot/Device from which you would read the parameter (Adress is in HW Config)
NextCommand = when should the next command after the readparameter be executed
CommandID = id of the read command (created from the user)

 Dear ChristophD,

Do you have project example or manual for using it ?

Best Regards,

Vorapob

Davinator

 

vorapob

Dear Experts,

I use SIMOTION D425-2 dp/pn I would like to read drive parameter via

_readdriveparameter and _readdrivemultiparameter blocks but I don't know

how to use it.

Can someone recommend me please ?

Best Regards,

Vorapob

 

Question: instead of torturing your mind with these commands (that works perfectly but they need some tests and time), why don't you use the I/O direct accessing ? This is not the proper name and Christoph will kill me for that naming, but in the I/O tab you can access directly to the Sinamics parameters, in a cyclic manner, so if you don't have much much parameters to read, and you want an easy way, the I/O way would be suitable for you. I use it intensively and it is great

 Dear Davinator,

How can I use the I/O direct accessing ?

Where is it locate in SIMOTION SCOUT ?

Best Regards,

Vorapob