6/23/2022 8:13 PM | |
Joined: 6/23/2022 Last visit: 11/2/2023 Posts: 1 Rating: (0) |
Hello Sir, In similar machine (hit-15s), 20080 alarm is sporadically. I`ve change spindle encoder and cable encoder but the problem continues. I don`t know which is the problem then... Could you help me, please? ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 06/24/2022 09:35:25New subject after splitting Last edited by: Jen_Moderator at: 06/27/2022 06:30:43Optimized headline. |
|
6/24/2022 10:09 AM | |
Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (872)
|
Hello, Is this spindle motor encoder or external encoder? If both had been replaced & still problem persist, then replace drive control module. |
6/24/2022 7:44 PM | |
Joined: 10/17/2007 Last visit: 5/12/2024 Posts: 3985 Rating: (342)
|
If you familiar with your machine , can you please check : #1--What kind of drive system used--Siemens 611A or 611D, if not sure take picture of the drive #2--from machine electrical drawing , or you know the HW configuration, check how many encoder your spindle have. From what you said, you replaced encoder and cable. I guess you don't touch motor encoder ( as that is not easy). please share picture/parts number of encoder and cable.
|
If you like my comments please |
|
Follow us on