ixo65

In attachment the changed files.

In LSC:
Take a look at Parameter-VM-Mapping.

In LWE:
Use instead of analog values then scale time.

 Thank you for the solution! I was so close to find it by myself 😂 i did not adress the timer state in parameter vm mapping. 

ixo65

But you have use analog values, not scale time.

In analog values you have no time format e.g. hh:mm:ss. By analog value is it the summ of the time basis.

Example by time base is second.

You have set one minute and 35 seconds. The analog value shows then 95 (1 x 60 +35).
And want you change to two minutes and 41 seconds then have you to enter 161 (2 x 60 + 41).

 I mean that i was close in ather atempt not in the exemple that i sended to you! From your ex i have used only the lsc program. Lwe i could not open becouse i did not update yet. I have seted well the field for time and it show minutes and seconds also in both fields... set and remaining. Thank you anyway!