Connect end switch to digital input 5.

Hi,

On Micromaster 440 I have problem. I would like to connect end switch to digital input 5 and when switch is active I would like digital output 1 to be active and stays active until end switch is active.

I hope I explain it what I want.

------------------------------------------------------------------------------------------
Split from Help needed with programming inputs and outputs Micromaster 440.

It's hard to do because with digital input control your drive and you whant directly then input active give output.

I don't know how your drive is controlled, if you don't use DC brake maybe you can define by your Discrete input : DC brake enable, and output you will see DC brake active.But then you need configure for DC braking parameters what it will not stop your motor

If, I understand what is required:

Digital outputs are P0731, P0732, & P0733.

To connect P0731, (digital output 1) to digital input 5, make P0731 = 705.

Toggle DIN5, terminal 16, and relay output 1 will operate.

Tractor